Skip to main navigation Skip to main content Skip to page footer
VRI Sitepackage VRI Sitepackage

VRI Webseitensuche

 
Reset
637 results:
151. Foreign matter contamination  
Foreign matter contamination Not acceptable.  
152. Fibrous and material burrs on out side diameter, bore and rivet holes  
Fibrous and material burrs on out side diameter, bore and rivet holes Acceptable up to 2 mm provided fitment is not affected.  
153. Edge chips; non-friction side  
Edge chips; non-friction side Acceptable if: max. 1 % surface area; max. 30% of thickness no more than 2 allowed.  
154. Edge chips; friction side inner or outer circumference  
Edge chips; friction side inner or outer circumference Acceptable if: max.0,5% surface area; 30% of thickness, no more than 2 allowed.  
155. Cracks joining drill holes on one face only  
Cracks joining drill holes on one face only Short distance between two holes acceptable, long distance between tow holes not acceptable, cracks joining three holes not acceptable.  
156. Crack or splits through the thickness of the disc  
Crack or splits through the thickness of the disc I.e. visible on both surfaces not acceptable.  
157. Crack or split visible on friction face only  
Crack or split visible on friction face only Acceptable up to a length equal to 15 % of diameter, 4 to 5 mm from disc edges. No more than 2 allowed.  
158. Crack or split visible on non-friction face only  
Crack or split visible on non-friction face only Acceptable up to a length equal to 20% of diameter, 3 to 10 mm from disc edges. No more than 2 allowed.  
159. Chips round drill lead holes (in material surface)  
Chips round drill lead holes (in material surface) Not acceptable.  
160. Chips round drill c/s and clearance holes friction side  
Chips round drill c/s and clearance holes friction side Acceptable if:<=0,25 % surface area; <=30% thickness but no more than 2 allowed.  
Search results 151 until 160 of 637