Skip to main content
VRI SitepackageVRI Sitepackage

VRI Webseitensuche

 
Reset
636 results:
21. Restricted lever movement  
Restricted lever movement Not acceptable. Lever movement must not be restricted by excess primer or incorrect riveting.  
22. Stencilled information  
Stencilled information Lining edge and shoe web must be clear.  
23. Edge chips; friction side inner or outer circumference  
Edge chips; friction side inner or outer circumference Acceptable if: max.0,5% surface area; 30% of thickness, no more than 2 allowed.  
24. Edge chips; non-friction side  
Edge chips; non-friction side Acceptable if: max. 1 % surface area; max. 30% of thickness no more than 2 allowed.  
25. Poor moulding; non friction side  
Poor moulding; non friction side Acceptable if: <=1% of area; <=30% of thickness no more than 2 allowed.  
26. Poor moulding; Friction side  
Poor moulding; Friction side Acceptable if: <= 0,5% of area; <=30% of thickness no more than 2 allowed.  
27. Indentations and plucked surface; friction side  
Indentations and plucked surface; friction side Acceptable if: <=0,5% of area; <=30% of thickness, no more than 2 allowed.  
28. Indentations and plucked surface; non-friction side  
Indentations and plucked surface; non-friction side Acceptable if: <=1% of area; <=30% of thickness, no more than 2 allowed.  
29. Higher porosity material  
Higher porosity material Acceptable if <5% of surface area; provided it is evenly distributed. High porosity area must not be through thickness of the disc.  
30. Crack or split visible on non-friction face only  
Crack or split visible on non-friction face only Acceptable up to a length equal to 20% of diameter, 3 to 10 mm from disc edges. No more than 2 allowed.  
Search results 21 until 30 of 636