Skip to main content
VRI SitepackageVRI Sitepackage

VRI Webseitensuche

 
Reset
636 results:
31. Grinding faults  
Grinding faults Acceptable up to 5% of surface of either side provided dimensional specifications are satisfied.  
32. Gasing split (Disc edges) bore or outside diameter  
Gasing split (Disc edges) bore or outside diameter Acceptable 5 mm long on a 200 mm dia disc and 10mm long above 200mm 0,5mm open and 5mm deep; no more than 2 allowed.  
33. Foreign matter contamination  
Foreign matter contamination Not acceptable.  
34. Fibrous and material burrs on out side diameter, bore and rivet holes  
Fibrous and material burrs on out side diameter, bore and rivet holes Acceptable up to 2 mm provided fitment is not affected.  
35. Cracks joining drill holes on one face only  
Cracks joining drill holes on one face only Short distance between two holes acceptable, long distance between tow holes not acceptable, cracks joining three holes not acceptable.  
36. Crack or splits through the thickness of the disc  
Crack or splits through the thickness of the disc I.e. visible on both surfaces not acceptable.  
37. Crack or split visible on friction face only  
Crack or split visible on friction face only Acceptable up to a length equal to 15 % of diameter, 4 to 5 mm from disc edges. No more than 2 allowed.  
38. Chips round drill lead holes (in material surface)  
Chips round drill lead holes (in material surface) Not acceptable.  
39. Chips round drill c/s and clearance holes friction side  
Chips round drill c/s and clearance holes friction side Acceptable if:<=0,25 % surface area; <=30% thickness but no more than 2 allowed.  
40. Chips round clearance holes in material surface; non-friction side  
Chips round clearance holes in material surface; non-friction side Acceptable if: <= 0,5% surface area; <=30% thickness but no more than 2 allowed.  
Search results 31 until 40 of 636